This package was originally $450k and has not run in production! (Brand New)
 
Manufactured in the USA
Fixed bridge design with a single moving table allows for – up to – 4,000 IPM programmable feed rates
and 1G of acceleration.
High-precision ball-screw drive for all axis movements. The table includes a pressure-sensitive safety
stop “edge switch” on the front and rear. In addition, a
360-degree emergency stop cable surrounds the machine.
Industrial machine control system with full 3D capability (multi-axis interpolation)
98 - 4x8 - Work Envelope
CR ONSRUD Aluminum Universal Vacuum Table System UPGRADE - Includes 4” intake manifold,
high-capacity vacuum plumbing, high-flow 45mm wide waffle patterns, with Onsrud’s Unique High
Flow
Vacuum Inlets, offer maximum vacuum airflow & absolutely minimal airflow restriction for excellent
part
holding 11 inches of Z stroke - 11” Z axis stroke and 15” under bridge clearance
8x4 - Flow-Through Spoil Board - LDF table top to be used as replaceable sacrificial spoil board.
Controller
FANUC 0i Machine Controller System with Panel-i HMI - Industrial CNC Machine Controller with Fanuc
Panel-i HMI w/High Res touch screen. Fanuc 0i is not a PC with a control card but is a dedicated
Industrial
PLC is designed to control CNC motion, for maximum reliability and performance. Includes: Network
capability,
adds Large FANUC Digital Drives and servos. Includes Full remote diagnostic troubleshooting
capabilities. Adds
m-code controlled vacuum zones (if equipped with Pneumatic Vacuum Zone option). Provided with 4-
port
network hub (requires 460V out isolation transformer).
FANUC MPG Handheld Remote Jog Pendant - Manual Pulse Generator, Portable, Axis Select Switch (X,
Y,
Z, 4), with LED and Multiple Switch (x1, x10, x100)
Head
18 HP Spindle - 4-Pole, 13.5Kw, 18HP – 24,000 RPM fully programmable & reversible, variable speed,
HSK
63F tool interface, quick-change spindle, capable of routing & drilling, programmable feed rates
w/override
capability. 2-Position Integrated Dust Transition System - Integrated Dust Extraction hood pulls chips
away from the
spindle’s nose & up a separate chamber & hood to effectively remove chips from the machining
process. (8in
dust transition also provided for connecting to your dropped-in flex hose) -
Automatic Directional Air Blast - Blows air on the tooltip to aid chip or dust evacuation. The direction
air blows
changes relative to the path of the machine. Can be turned on / off via M-Code.
Roller Hold-Down Options
Roller Hold Down Option - 2 Rollers on each side of the cutting spindles, automatically extend &
retract as
rollers roll off cutting table, for holding down warped sheet stock such as low-grade plywood. Each
roller’s
pressure can be regulated to prevent unnecessarily slamming the rollers into the table & the material.
Usually
assists standard vacuum holding, but may be purchased without vacuum. Approximately 6 inches
clearance
between rollers, depending on head configuration.
Isolation Transformer Options
Isolation Transformer - 6-tap, non-compensating transformer helps adjust your plant power to the
exact
power needed by your CNC. Input voltage needs to be specified after order. Non-standard voltages
may have
additional charges.
Machine Lubrication Systems Options
Automatic Grease Lubrication System - replaces the machine’s standard centralized grease lubrication
on standard machines
Tool Changer
12 Tool - Dynamic Automatic Rotary Tool Changer - Fully Servo controlled instead of Stepper
controlled or Rack-Style tool changers. The design eliminates misfires & quickly changes between 12
different tools.
Air Conditioned Electronics Cabinets - Recommended for extreme environments & some non-
temperature
controlled workplaces. Option replaces the standard heat exchanger system.
Material Handling Options
Automated Nested Sheet Side Offload System with Integrated Dust Extraction - The System removes
finished parts, scrap, and all dust and debris from the machining area onto the offload table. Includes
Material
Removal Scrap-Arm system with Integrated 6” Dust Extraction Hood (recommended 4000 cfm). The
system
requires and mounts to the Onsrud S Series Automated Material Infeed Side-Loading System.
Material Handling Infeed Options
Onsrud S Series Automated Material Infeed Side-Loading System - Fully Automated system for the
loading of full sheets of Plywood, Melamine, or other similar smooth sheets over 1/4" thickness up to
1”
thickness, up to 100 lbs each.
This system uses an overhead side loading crane system with a riding carriage that lifts materials
instead of
sliding them to help prevent scratching. The sheet is loaded in a shorter direction to save time and
machine footprint.
Includes Scissor Lift with up to full bunk capabilities (34in stack height)
Material Handling Offload Options
Side Integrated Conveyor Out-Feed Table for Automated Nested Sheet Side Offload System -
Integrated
conveyor system conveniently delivers the finished parts to the operator beside the machine.
Conveyor moves
the panel across its width instead of length to allow the panel to shift across what is typically the Y-
Axis of the
machine. An electric eye senses when the conveyor should run and bring the parts to the operator or
stops movement to wait for the operator to retrieve each part.
The machine control signals the conveyor to start running when the Automated Nested Sheet Side
Offload
The system goes to sweep and offload the parts from the machining table.
A dust extraction grate is located at the table’s transition (with separate 8in transition - recommended
2000
cfm) which collects loose dust & debris as the sheet transitions from the machining area to the offload
table.
An additional dust extraction grate (with additional 8in dust hose port) collects any remaining debris
at the end
of the conveyor where the operator stacks the finished parts. Accommodates sheets up to 5ft x
10ft.Bunk Pre-Stage Roller Conveyor Station Option - Adds a pre-stage area for a bunk of material to
be placed while there is a bunk on the machine's scissor lift. Once the scissor lift is empty, the bunk in
the pre-stage area will be transferred to the scissor lift.
Auxiliary Options
Stack Light for Machine Status - 4 color stack light: Green, Yellow, Red, Blue are tied into the status of
the machine to allow a quick, at a glance, look at the machine's current running state.
Vacuum Pump
25HP Dekker V-Max Liquid Ring Vacuum Pump - 410 CFM System @ 29”/hg; 696 m3/hr @982Mb.
Auto Tool Length Touchpad Digitizer - Measures tool length and records in machine tool length tables,
may
not work with custom or non-standard tooling or some custom profiles.